-40%
Universal 188650 M7012/27CK-5EU-JT3S6 70W M139/C139

Universal 188650 M7012/27CK-5EU-JT3S6 70W M139/C139

$ 42.23

Availability: 10 in stock
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money Back
  • Brand: Universal Lighting Technologies
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Buyer
  • Condition: New
  • Restocking Fee: No
  • MPN: 188650

    Description

    Universal 188650 M7012/27CK-5EU-JT3S6 70W M139/C139 or M98/C98 1-Lamp Electronic HID 120-277V Ballast Used To Operate (1) 70W Ceramic Metal Halide Lamp
    Operates (1) 70W Ceramic Metal Halide Lamp
    Ansi Code M139/C139 or M98/C98
    Voltage : 120/277vac, +/-10%, 50/60Hz
    Microprocessor controlled
    Compatible with 3 or 4 wire IDTPs
    DIM: (L) 5.02in (W) 3.62in x (H)1.57in
    RoHS Compliant
    Additional Information
    Energy Efficient
    Greater than 20% increase in efficiency
    Lowers lighting operation costs
    Full Light Output
    Provides same light levels as magnetic ballasts being replaced
    Quiet Operation
    Significantly quieter than magnetic ballasts
    High Frequency Operation
    No lamp flickering
    Light Weight - Low Profile Case
    Simplifies transportation & installation
    Less interference with ballast channel cover during replacement
    Slimline Ballasts Feature Parallel Lamp Operation
    When one lamp fails, other lamp remains lit
    Instant start electronic ballast for long lamp starting cycles and low initial cost
    RoHs Compliant
    UL Type 1 Outdoor
    Spec Sheet
    M7012/27CK-5EU-JT3-S6
    • Meets ANSI Standard C62.41-1991 • CULUS Listed (Outdoor Type 1)
    • Resonance Start
    • RoHS Compliant
    Volts Lamp
    • Line Voltage : 120/277vac, +/-10%, 50/60Hz
    Standard - electronic low frequency square wave ballast for 70W metal halide lamps with 120V "tap" for 3 or 4-
    wire self heating thermal protectors (IDTPs). Ballast has extra-long 36” lead lengths.
    • Abnormal operation shutdown circuit: Line
    • Mounting type: Studs - Top lead exit voltage must be reset
    1
    • Lead stripping:(Tinned) All
    • Thermal Protection
    • Meets ANSI Standard C82.14-2006
    - Can be operated as normal HID ballast with tap lead capped-off
    • Microprocessor controlled
    • IDTP "tap" Function: Provides 120V to heaters of IDTPs.
    • Meets FCC Part 18C for EMI & RFI (non-consumer)
    15 Feet Note: Each lamp's lead wires must be run in a separate minimum 1/2" ID conduit from the input
    leads to achieve good EMI performance and maximum remote capabilities. Individual , unbundled
    lead wires must be used for extension wiring using wire types SF-2 or SFF-2 or equivalent. Power
    cords and MC cables are not acceptable extension wiring methods.