Water Well Tank Tee Installation Kit w/ 1 1/4"x14" Tee w/Double Front Taps NEW

Description

Tank Tee Installation Kit.  This kit includes one each of the following:
FTX-5-4 Tank Tee.  This tee is 13" from end of thread to centerline on end of Tee and 14" overall.  It is designed for use with a well tank that takes a 1 1/4" Male threaded Tee.  The supply and service sides of the Tee are 1 1/4" MPT and 1" FPT on both sides.  This allows the Tee to be used with either 1 1/4" or 1" pipe.  The Tee has two sets of double taps on the front to accommodate a pressure switch with 1/4" nipple, a 1/4" gauge, a 3/4" boiler drain and a 3/4" relief valve.  The Tee is a fabricated tee, meaning that the top and bottom of the tee are constructed of Brass while the leg or riser is copper.  The copper has been sweated into the brass at the factory for you - no sweating necessary for installation.
PS-C Pressure Switch.  This pressure switch from Campbell is factory preset to 40/60PSI.  Contact me if you require a 30/50 or 20/40 switch and I may be able to accommodate you depending upon current inventory.  All Campbell switches are UL listed and are designed to provide many years of service.
1/4" x 3" brass nipple for installing Pressure Switch. The 1/4" nipple threads into one of the 1/4" taps on the Tee.
3/4" Campbell Relief Valve - part number RV3NLF.  This threads into one of the 3/4"" taps on the Tee.  This relief valve is non adjustable and is factory set at 75PSI
3/4" Campbell Boiler Drain, part number BD3LF.  This threads into one of the 3/4" tapas on the Tee.
1/4" Campbell Pressure Gauge, part number PG1TLF.  This threads into one of the 1/4" taps on the Tee.  This gauge has a 2" face and measures pressure from 0 to 100 PSI.
All purchases will ship on the next business day except for some rare instances where there may be a one day delay.  All purchases will ship via USPS Priority Mail for FREE!  Best Deal On eBay!!!